lps60-m series 60 watts medical total power: 60 - 80 watts input voltage: 85 - 264 vac 120 - 300 vdc # of outputs: single special features ? medical safety approvals ? universal input ? 3 x 5 footprint ? remote sense ? built in emi flter ? low output ripple ? adjustable output voltage ? overload protection ? 110 khz switching frequency ? rohs compliant ? lpx60 enclosure kit available safety ? tuv en 60950-1 en 60601-1 ? ul ul 2601-1 csa 22.2 no. 601.1 e182560 ? cb iec 60950-1 iec 60601-1 ? ce mark (lvd) electrical specifcations input input range 85 - 264 vac (wide range), 120 - 300 vdc frequency 47 - 440 hz inrush current <18 a peak @ 115 vac, <36 a peak @ 230 vac, cold start @ 25 c input current 1.5 a max. (rms) @ 115 vac effciency 70% typical at full load emi flter fcc class a conducted; cispr22 class a conducted; en55022 class a conducted; vde0878 pt3 class a conducted safety ground leakage current < 75 a @ 50/60 hz; 264 vac input output maximum power 60 w for convection; 80 w with 30 cfm forced air adjustment range -5, +10% minimum hold-up time 20 ms @ 60 w load, 115 vac nominal line overload protection short circuit protection on all outputs case overload protected @ 110 - 145% above peak rating overvoltage protection 5 v output; 5.7 - 6.7 vdc. other outputs 10% to 25% above nominal output remote sense compensates for 0.5 v lead drop min. will operate without remote sense connected reverse connection protected data sheet power
environmental specifcations operating temperature 0 to 50 c ambient. derate each output as 2.5% per degree from 50 to 70 c, -20 c startup storage temperature -40 c to +85 c electromagnetic susceptibility designed to meet iec61000-4-2, -4-3, -4-4, -4-5, -4-6, level 3 humidity operating; non-condensing 5% to 95% rh vibration three orthogonal axes, sweep at 1cot/min, 5 min.dwell at four major resonances 0.75g peak 5hz to 500 hz, operational temperature coeffcient 0.04% per c mtbf demonstrated > 550,000 hours at full load and 25 c ambient conditions ordering information model number output voltage minimum load maximum load with convection cooling maximum load with 30cfm forced air peak load 1 regulation 2 ripple p/p(pard) 3 lps63-m 12 v 0a 5 a 6.7 a 7.5 a 2% 120 mv LPS64-M 15 v 0a 4 a 5.3 a 6 a 2% 150 mv lps65-m 24 v 0a 2.5 a 3.3 a 3.8 a 2% 240 mv 1. peak current lasting < 30 seconds with a maximum 10% duty cycle. 2. at 25 c including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. peak-to-peak with 20 mhz bandwidth and 10 f (tantalum capacitor) in parallel with a 0. f capacitor at rated line voltage and load ranges. 4. this product is a component power supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. emc compliance to appropriate standards must be verifed at the system level. this product is for sale to oems and system integrators, including through distribution channels. it is not intended for sale to end users. power derating curve output power (watts) 0c 20w 40w 60w 80w 10c 20c 30c 40c 50c 60c 70c ta ? ambient temperature ? c 0w natural convection cooling 40w 30w 30 cfm forced air cooling lps60-m series data sheet
lps60-m series-ds 18mar2016 mechanical drawings pin assignments connector lps62-m lps63-m LPS64-M sk1-1 line line line sk1-3 neutral neutral neutral sk2-1 +12 v +15 v +24 v sk2-2 +12 v +15 v +24 v sk2-3 +12 v +15 v +24 v sk2-4 common common common sk2-5 common common common sk2-6 common common common sk201-1 +sense +sense +sense sk201-2 -sense -sense -sense mating connectors ac input molex 09-50-8031 (usa) not required for (-t) option 09-91-0300 (uk) pins: 08-58-0111 dc outputs molex 09-50-8061 (usa) not required for (-t) option 09-91-0600 (uk) pins: 08-52-0113 remote sense molex 22-01-2025 pins: 08-52-0113 astec connector kit #70-841-006, includes all of the above 1. specifcations subject to change without notice. 2. all dimensions in inches (mm), tolerance is 0.02 (0.5 mm) 3. mounting holes m1 and m2 should be grounded for emi purposes. 4. mounting hole m1 is safety ground connection. 5. specifcations are for convection rating at factory settings at 115 vac input, 25 c unless otherwise stated. 6. warranty: 2 years 7. weight: 0.75 lbs/0.34 kg 3.00" (76.2) 2.55" (64.8) 0.22" (5.6) 0.22" (5.6) 4.56" (115.8) 5.00" (127) 1.69" (42.9) 0.12" (3) sk 1 sk 2 1 2 3 4 5 6 0.15" (4) dia (4 plac es) gnd 3 1 n l m1 m2 remot e s ense c onnec t or _ + sk201 v oltage a dj . p ot lps60-m series data sheet worldwide offices americas 2900 s.diablo way tempe, az 85282 usa +1 888 412 7832 europe (uk) waterfront business park merry hill, dudley west midlands, dy5 1lx united kingdom +44 (0) 1384 842 211 asia (hk) 14/f, lu plaza 2 wing yip street kwun tong, kowloon hong kong +852 2176 3333 for more information: www.artesyn.com/power for support: productsupport.ep@artesyn.com artesyn embedded technologies, artesyn and the artesyn embedded technologies logo are trademarks and service marks of artesyn embedded technologies, inc. all other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. ? 2016 artesyn embedded technologies, inc. all rights reserved. for full legal terms and conditions, please visit www.artesyn.com/legal. www.artesyn.com
|
